Establishing and keeping a cleaning routine for your swimming pool is a very important aspect involved in pool maintenance. Poorly maintained pools can cause health issues over the long run, most often bad eye irritation if the best swimming goggles aren't used.
Unfortunately, it's not an easy task for the average person. On the the bright side you found this guide to make sure that you have the knowledge to fully clean and maintain your pool including fixing a chemical imbalance which you can resolve with either chlorine tablets or algaecide, or algae can form in your pool, causing it to turn green.
The cleaning routine includes some brushing as well. You can find the best swimming pool brush here.
We made this post because we wanted to help other people learn how to clean a pool so that keeping the cleanliness of your pool does not need to be as challenging as you might imagine. With the right techniques and tools, you can expect to see a well maintained swimming pool under your care.
Swimming Pool Care Basics
In the scorching heat of the sun, taking a dip in your swimming pool is certainly a relief. However, before you can enjoy the water, it is very important to perform all basic maintenance routines in order to prolong its cleanliness.
It requires a lot of work and most people hate this part of owning a pool, but if you neglect the quality of water in your pool, you will not be able to enjoy swimming in it. Fortunately, it is a lot easier than most people think.
You’ll need to regularly check the pool water. We recommend using one of the best digital pool water testers at least once a week to evaluate the pool chemicals.
To help keep it easy we outline the key things to think about when you want to clean your pool. The following are some of the 4 most important points how to maintain your swimming pool:
1. Purchase a cover for your pool
Whether you own a pool right at the comfort of your home, or you are caring for a commercial pool area, preparing a cover is very important. Pool covers can provide protection for the pool when it is not in use for a long period of time, such as during the long winter months, or when you are out for a holiday. With a pool cover you will only have to clean your pool when you actually use it.
It also offers a shield for your pool against falling objects, as well as other elements of the weather. It may also serve as a barrier which prevents pets and small children from falling into it. While the setup may take some work and requires a small upfront cost, it can offer long-term benefits and save a lot of time.
2. Remove all forms of pool debris
Pool maintenance and cleaning is related directly as to how often the swimming pool is used. Thus, if you regularly use your pool, investing in a great pool skimmer is a good decision. A skimmer is actually a rake or net that you can use in fishing different objects out of the water.
Removing floating debris like dead insects and leaves out of the water is a process that only takes about a couple of minutes. When doing this, it is important to ensure that you properly dispose the waste far from the area so that it will not just be blown back by the wind or just toss it in the trash. Of course there is debris on the bottom of the pool, but we’ll tell you how to get that later on in this post.
3. Focus on circulation With Swimming Pool Pumps
The Best swimming pool pumps serve as the focal point of the entire filtration system. Its role involves moving the water within the pool, sending it towards the filter, so that debris, dirt, or dust can be expelled before it is sent back to the pool. The actual size of your swimming pool, including the number of swimmers that use it play a huge role in determining the length of time that the pump should be run.
According to Par Pool Spa, there are different considerations that enter the picture when deciding how long to run your pool pump for. As a general rule, however, is to keep the pump running for around 1 hour for every 10 degrees Fahrenheit of temperature (70 degree means 7 hours).
4. The importance of filtration
Filtration is one process that is vital in pool maintenance. Pool circulation helps move your water around so that it can go through this part of the cleaning process. That way, undissolved debris and dirt will be removed from the pool from the pool.
There are different kinds of filters that are available for pools, including anthracite, sand and gravel, as well as diatomaceous earth. However, the most popular filtration medium is sand because it is dependable.
5. Filling Up The Pool
If the water volume in your pool drops too much this can actually damage the pool and crack the interior. To combat this, you’ll want to fill your pool regularly with a hose with a proper hose nozzle – don’t just use a spray only nozzle, or it will take forever! How often depends on the amount of evaporation in your area, but we recommend once every 2-4 weeks.
3 Different Ways on How to Clean A Pool
Swimming pools offer hours of entertainment and fun for different types of people. As such, you would want it to be completely healthy and safe. Due to the fact that availing of professional swimming pool care services may turn out to be very expensive, understanding the 3 primary ways about how to clean your pool is very important.
There are three types of cleaning models that people use:
1. 100% Manual – DIY
By far, there is no doubt that this is the cheapest choice that you can have — it just requires the most time. It only needs basic tools and equipment. All you need to have is a brush, pool skimmer, a long pool pole and a manual pool cleaner. You can skim the water on the pool every day in order to get rid of leaves, bugs, as well as debris that build-up on the water.
However, before cleaning up the bottom, you can brush first the wall of the pools in order to clean caked-on debris and dirt. You can then move towards shutting off the filter, and start vacuuming the floor. After finishing, you can work on cleaning the filter of the pool.
2. Automatic Inground Pool Cleaners and Skimmers
This technology is quite similar to the methods involved in the manual option, minus your intervention. There are options on cleaners that you can choose from, including pressure side pool cleaners, as well as suction side pool cleaners. Pressure side and suction side cleaners and are the ones that are connected, either to the pump of the pool, or to a booster pump.
Perhaps the best and newest type of device is the robotic pool cleaner. They are highly effective, self-contained devices that come with their own motor which are great at cleaning an entire pool. The robots scrub the walls and sides.
To supplement your pool vacuum, which just takes care of the pool floor we suggest having a good skimmer. Pool skimmers will help to remove debris and other junk from the top of the pool water.
With these 2 devices, all you have to do is spend 5minutes a week brushing off the steps and skimming debris off the surface and occasionally throwing in some chlorine tablets.
Using automatic pool cleaners is definitely our recommended method as it saves a TON of time and is relatively cheap to option 3. Check this post about our favorite pool cleaners.
3. Hiring A Pool Man
Hiring a pool man may be the easiest option, but is the most expensive one in the long run. With an automatic pool cleaner you may have to spend $300-600 one time. However, with a pool man you will be spending easily that much in just a year.
This is my least favorite option since in the past my pool guys sometimes don’t show up or have taken stuff that are left out in the back yard.
Summing up the Options
Using any of these three methods have their advantages and disadvantages.
- Doing it yourself will save you money, but taking an hour or longer every week to clean a pool can be a pain.
- Using automatic pool cleaners saves a lot of time and just requires a couple hundred dollars that will last you for several years.
- Hiring a pool man will take it completely off your mind, but they are expensive and not always dependable.
Maintenance Tips for Cleaning Your Pool
At this point, one thing is clear: regular care of your pool is the secret to keeping its pristine condition. If you deal with common issues such as broken pumps or murky water as early as possible, you will not just be able to expect quality of water in the pool, but also have an even better experience for the swimmers.
Regardless of whether you will use the services of a professional company, or do things on your own, there are some regular maintenance tips that you should take to maintain a clean swimming pool.
1. Brush the pool walls and steps
A pool needs to be cleaned about once a week if you’re doing it yourself (if you have an automatic pool cleaner it’s less often). The first step is to make sure you brush the walls and steps before cleaning the bottom of the pool.
Brushing help in minimizing the buildup of algae, as well as calcium deposits, so that they will not turn into bigger issues or cause a huge pool chemical imbalance. If it gets bad enough you may have to drain your entire pool and refill it.
Even if you do brush it regularly you will have to check the PH levels and add chemicals to your pool. In fact, this is why the Olympic pool in Rio, Brazil 2016 turned GREEN.
Adding pool chemicals can be annoying and expensive so the best thing to do is just follow these simple steps to avoid doing so.
2. Use a swimming pool filter!
Basically, there are three types of swimming pool filters for your pool: sand, cartridge and diatomaceous earth. Even though there are different procedures for maintaining each type, all of them need periodic cleanup according to their type.
One sign that can tell you it’s already time for cleaning is the increase in the flow between the flow meter and the pressure gauge. When the filter difference is already at 10 to 15 pounds per square inch, or 4.5 to 6.8 kg, it is time to. Check out this great article for more details.
Here is a video on how to do so: for ONE type of filter (it may vary depending on your system ):
How to Clean a Green Pool
If you have unfortunately ignored the proper maintenance routine, you may observe that your pool water has turned cloudy and green in color. Certainly this is something that is not good to look at much less swim in.
You may be wondering how to clean a pool by getting rid of this cloudiness. Even though the process may involve some time and effort, the output will surely be amazing.
What makes a pool green?
There are several reasons that lead to this scenario. For one, imbalanced level of pool chemicals can make the pool water change colors. This can involve high or low levels of chlorine, high alkalinity, as well as the presence of sanitizers that are used in the pool.
Without the right balance, unwanted substances may contaminate faster in the water that causes algae, which is what ultimately makes your pool turn green.
Another potential reason is issues with the filter.
If the system is faulty, or perhaps you failed to run the filter as needed, that is, 7 to 10 hours every day, there is a huge tendency for the water to become cloudy. The aim of having a filter system is to clean the pool water constantly. If you fail to properly use it, the water can become stagnant, resulting in clouds.
The environment can also have impact on the quality of pool water. For instance, the things that surround your pool may cause the water to become cloudy, including the presence of trees, birds, and construction. These things can cause debris, sand, or leaves to fall into your pool, thus making it cloudy or green.
These additional things also change the chemical balance of your pool, and can help algae grow. If you’re looking to get rid of algae, then get a good algaecide to help keep your pool clean.
Cleaning Up A Cloudy Pool
After identifying the main cause of your cloudy pool, you may now focus on the solution. One of the options includes the use of a pool water clarifier every week. They work by collecting tiny particles which cause the water to be cloudy, binding them together to create larger particles which will then be picked by the filter more easily.
You may also want to use a pool flocculent (also known as pool floc), which can be used to clear pool water effectively.
The process of flocking the pool is just time consuming and labor intensive. A flocculant works by gathering all the smaller particles which make the water cloudy, settling them all at the pool bottom, forming a cloud.
Common Swimming Pool Maintenance and Cleaning Equipment
A clean swimming pool is very important so that you can completely enjoy the entire swimming experience. A cloudy, discolored, stained, and unclean pool is not just ugly, but may also result in some accidents, as well as health issues among the swimmers.
The process of cleaning your pool involves the use of some equipment. The following are some of them.
Swimming Pool Skimmer
Pool skimmers are very important in providing protection to your water against unclean water, as well as in removing debris from the surface of the pool. They also trap different floating garbage even before they sink to the pool bottom.
As such, there is an assurance that the pool is kept clean, while enhancing the overall efficiency of the filter. There are different types of skimmers that can be used, depending on whether you have an above ground, as well as in-ground pools.
Skimmers are typically installed close to the pool surface. It usually includes a lid, a basket, as well as an open channel with which the water freely flows. They also usually feature a simple operation such as a manual, hand held skimmer.
Automatic pool skimmers are even easier to use because once you install it – water goes through the skimmer, collecting the debris in the basket. The clean water is then returned back to the pool.
The baskets need to be periodically emptied in order to prevent the debris from blocking the water from going through the skimmer. If it’s not cleared then it will stop being able to pick up debris and it will not aid in cleaning your pool.
Generally speaking, there are different types and sizes of brushes that are available. As simple as they may be, they provide the basic functions, including scrubbing pool floors and walls in order to remove debris, and a build-up of other substances.
The brushes may have aluminum, plastic, or steel brackets, usually requiring a pole or handle to access certain areas which need to be cleaned. Even though the poles and the handles may vary when it comes to lengths, you may have to get a telescoping handle for areas that are hard to access, as well as to potentially extend your reach.
These brushes usually come with non-scratch bristles, and may be used on fiberglass, tiles, cement, as well as vinyl to remove rust, algae, as well as dirt. There are also other options on hard bristles which are typically used in acid washing, as well as in preparing deck and pool surfaces for paint application.
One very important aspect that you have to know if you want to find out how to clean your pool then it is important knowing the best type of brush to use for your pool.
Hoses and Vacuums
Making sure that your pool is sparkly clean needs regular removal of unsightly debris and cleaning through vacuuming. Common debris may include insects, leaves, as well as dirt that fall to the pool, making the water look unpleasantly dirty. These pool vacuum cleaners for pools are ideal for debris removal, especially those that have settled to the pool bottom.
Automatic Pool Cleaners
Automatic Pool cleaners make it possible for easy and fast cleaning, easily picking up leaves, rocks, as well as other debris, thus leaving your water clean. There are a lot of options on vacuum hoses and poles that you can choose from, using them to extend your reach even better to clean difficult to access areas.
You may even opt for replacement parts and accessories to make it easier to complete the task. This is a big time saver for a cheap solution. To find out which ones we recommend take a look at our review of 8 robotic automatic pool cleaners.
Other Cleaning Accessories
You have already installed a great pool with the best tools and equipment, but the most important task involved is maintaining and the upkeep of your pool. This is not all, though. There is also a need to clean the tools and equipment as well. As such, you need to have in hand the most accessible cleaning accessories that can make it easier to clean your pool, and in keeping your equipment at their best.
For instance, wants and cartridge cleaning flossers help in getting rid of debris and dirt that are stuck in the cartridge pleats. It also does not easily wash off with water. Having a clean cartridge is very important so as to make sure that your filter works properly.
You can also opt to have scrubbing mitts and pumice stones that help in removing dirt and stains, and may even be used as a standalone, or with chemicals and cleaners.
Other interesting accessories include the Sun Sorb and Scum Ball which works by absorbing body lotions, oils, as well as waste from swimmers, thus preventing scum lines formation at the edge of the water, and reduce foaming at the same time. They are best to use during the summer when you are using the pool a lot or else the oils may cause permanent water line marks in your pool.
How to Clean A Pool: Bottom Line
Indeed, learning how to clean your swimming pool involves a lot of things that you need to take into consideration. Aside from learning the different technologies and techniques that are involved in the process, you also need to make sure that you have access to the most effective tools and equipment in order to do the process.
While you can easily opt for professional services to do the job, knowing how to clean your pool use by yourself gives you the ultimate edge and choice. Aside from the fact that cleaning it yourself is cheaper, you can also make sure of the quality of work that you do.
With the right information at hand, you can be assured that you can maintain your pool accordingly.